Wall‑Mounted 5KWH ESS
The Wall-Mounted 5kWh ESS provides 5324Wh nominal energy from LiFePO4 cells in a 51.2V DC system. Designed for indoor wall-mounted residential storage, it supports 100A maximum charge or discharge current and parallel expansion up to 15 units. RS485 and CAN communication, LCD status display, intelligent BMS protection, IP20 construction and export documents support inverter-integrated projects.
Key Features
- ✓5324Wh nominal energy at 51.2V DC and 104Ah capacity
- ✓42-57.6V DC operating voltage range for residential storage systems
- ✓Less than 50A nominal and 100A maximum charge or discharge current
- ✓RS485 and CAN communication for compatible inverter integration
- ✓Communication compatibility with Growatt, Deye, GoodWe, Victron and other brands
- ✓Parallel expansion support for up to 15 units
- ✓Intelligent BMS with over-charge, over-discharge, short-circuit and temperature protection
- ✓Wall-mounted IP20 enclosure with LCD status display for indoor installation
Technical Specifications
Common FAQs
Start with the required loads, operating time, reserve capacity and inverter compatibility, then compare the result with 5324Wh nominal energy. Check continuous and peak current requirements against the published limits. Actual usable energy depends on system settings, load profile, temperature, conversion losses and the selected depth of discharge.
Yes. The product supports parallel expansion with up to 15 units. Confirm the complete system configuration, compatible inverter, communication arrangement, protection, cable sizing and installation space before ordering. Use the same approved battery model and follow the final wiring and commissioning instructions for the planned project.
The battery supports RS485 and CAN communication and is listed as compatible with common inverter brands including Growatt, Deye, GoodWe, Victron, SMA, Solis, Luxpower and Voltronic. Confirm the exact inverter model, firmware, communication cable and protocol settings before installation, because brand compatibility does not confirm every model.
The unit is wall-mounted and has an IP20 enclosure, so it is intended for indoor installation only. It measures 410 × 185 × 610mm and weighs 46kg. Confirm wall structure, fixing method, clearances, ventilation, service access and local installation requirements before selecting the site.
Use the 5324Wh nominal energy as the starting point, then account for the selected depth of discharge, inverter efficiency, load profile, temperature, cable losses and reserve capacity. Divide usable watt-hours by the measured load in watts for an initial estimate. Actual runtime depends on the configured system and operating conditions.
The intelligent BMS provides multi-layer protection covering over-charge, over-discharge, short-circuit and over-temperature conditions. The nominal charge and discharge current is less than 50A, while the maximum is 100A. Confirm inverter limits, protective devices, cabling and installation conditions before commissioning the storage system.
UN38.3, CE and RoHS documents are available. Every order includes a 3-year limited warranty. Confirm target-market documentation, labeling and import requirements before ordering. Provide the planned inverter, quantity, application, destination and installation environment so the available document set can be checked for the project.
Provide required storage energy, load profile, inverter brand and model, communication method, number of battery units, installation location, wall conditions, quantity and destination. Include the intended expansion plan if parallel operation is required. The final configuration, documentation and commercial details should be confirmed with our team.