Eg007Li-500W Portable Power Station
The Eg007Li 500W portable power station uses a LiFePO4 battery with 307.2Wh, 384Wh or 460.8Wh capacity options. Its pure sine wave output supports compatible laptops, CPAP devices, mini-fridges, drones and sensitive electronics within 500W. The unit includes USB, PD, QC3.0, DC5521 and cigarette lighter outputs, optional 90W solar charging, dual LED lights, LCD status display and built-in protections.
Key Features
- ✓500W rated pure sine wave output for compatible sensitive electronics and portable equipment
- ✓Three LiFePO4 battery options provide 307.2Wh, 384Wh or 460.8Wh rated energy
- ✓AC output available in 220V or 110V with universal, EU, US or UK sockets
- ✓USB, QC3.0, PD20W, DC5521 and cigarette lighter ports support varied loads
- ✓Optional solar charging accepts 15-20V input up to 90W through built-in controller
- ✓Dual independent 1W LED lights provide half, full and SOS modes
- ✓LCD displays capacity, voltage and charging or discharging status
- ✓Multiple protection functions and intelligent cooling support portable operation
Technical Specifications
Common FAQs
Select 307.2Wh, 384Wh or 460.8Wh according to the required operating time, order profile and target application. The rated output remains 500W across the options. Actual runtime depends on the connected load, conversion efficiency, battery capacity and operating conditions. Confirm the selected capacity before ordering.
The model suits compatible laptops, CPAP devices, mini-fridges, drones and sensitive electronics within the 500W rated output. Confirm each device's startup demand, continuous consumption, voltage and plug requirement before selection. Pure sine wave output does not remove the need to verify the complete load and operating environment.
AC charging uses the supplied 16V 5A charger, with about six hours to reach 80 percent after full discharge. Solar charging supports 15-20V input up to 90W and 6A through the built-in solar controller. Confirm the optional panel configuration and charging conditions before ordering.
The unit provides AC sockets, two USB 5V/2.1A ports, one QC3.0 18W port, one PD20W port, two DC5521 ports and one cigarette lighter port with 10A total. Match each device to its voltage, current and connector requirements, then confirm the selected socket standard.
The dual 1W LED lights offer half, full and SOS modes with independent control. The LCD shows capacity, voltage and charge or discharge status for basic operating checks. Confirm whether the display information and lighting functions meet the requirements of the intended portable power application.
The enclosure measures 293 × 181 × 206mm and weighs approximately 5.86kg. It uses fireproof plastic, an intelligent cooling fan and noise below 45dB at 1m. The stated working temperature is -10 to 40°C. Confirm installation space, handling needs and environmental conditions before ordering.
UN38.3, CE and RoHS documents are available for product and shipment review. Every order includes a 3-year limited warranty. Confirm target market requirements and provide the requested documentation list before placing a project order.
Provide the required battery capacity, AC voltage and frequency, socket standard, expected application, quantity and optional solar panel requirement. Also state the target market and any document needs. This allows our team to confirm the suitable configuration, quotation details and order requirements.