Eg012Li-100W Portable Power Station
The Eg012Li 100W portable power station combines a 12.8V 76.8Wh LiFePO4 battery with modified sine wave AC output in 220V or 110V versions. It provides two USB 5V/2.4A ports, two DC5521 12V/3A outputs, four-state LED lighting and an LCD status display. The approximately 1kg ABS enclosure measures 160 × 100 × 143mm and supports compact backup, outdoor lighting and emergency use.
Key Features
- ✓100W rated modified sine wave output supports compatible compact backup loads
- ✓12.8V 76.8Wh LiFePO4 battery provides portable stored energy
- ✓AC output available in 220V or 110V versions with universal socket
- ✓Two USB 5V/2.4A ports support compatible USB electronics
- ✓Two DC5521 12V/3A outputs support selected small DC devices
- ✓Optional 16V 20W solar panel connects through the solar charging port
- ✓Four-state LED light offers bright, half-bright, flashing and off modes
- ✓LCD status display and built-in protections support portable operation
Technical Specifications
Common FAQs
The Eg012Li suits compact backup power, outdoor lighting, small DC devices and USB electronics within its 100W rated output. Check the device's voltage, current, startup demand and connector before selection. Actual operating time depends on the connected load, battery condition, conversion efficiency and operating conditions.
The approximately 1kg unit measures 160 × 100 × 143mm and suits portable or emergency use where space and handling matter. Typical applications include outdoor lighting, small DC devices, USB electronics and compact backup power. Confirm installation space, environmental conditions and required operating time before ordering.
Solar charging supports an optional 16V 20W panel through the DC5521 solar charging port and built-in solar charge controller. Maximum charging current is 2A. Confirm panel availability, connector compatibility and the selected configuration with our team before ordering. Do not assume a different panel specification without confirmation.
No. The Eg012Li uses modified sine wave output rated at 100W, with 220V or 110V versions and 50/60Hz options. Check each proposed AC device for modified sine wave compatibility, voltage and startup demand. USB and DC loads should also be checked against their published requirements.
The unit includes two USB 5V/2.4A ports, two DC5521 12V/3A ports and one LED light. The LED provides bright, half-bright, flashing and off states. Match connected devices to the stated voltage, current and connector requirements before selecting the product for a project.
The LCD shows capacity, voltage and charge or discharge status for basic operating checks. The unit also has automatic cooling and noise below 45dB at 1m. Confirm whether these display and operating features meet the requirements of the intended portable or emergency power application.
UN38.3, CE and RoHS documents are available for product and shipment review. Every order includes a 3-year limited warranty. Confirm target market requirements and provide the requested documentation list before placing a project order.
Provide the required output voltage, application, quantity, expected USB or DC loads, solar panel requirement and target market. Also state any document needs. Our team can then confirm the suitable configuration, panel arrangement, quotation details and order requirements before project supply.