Quick Inquiry

Tell us what you need — we reply promptly.

IP65 Pole-Mounted 48V 50Ah Telecom Battery

The IP65 Pole-Mounted 48V 50Ah telecom LiFePO4 battery provides 2.4kWh of outdoor backup for RRU, AAU and distributed remote sites. Its 16-cell pack, BMS and aluminum die-cast enclosure form an integrated 22.2kg unit with RS485/RS232 communication and comprehensive alarms. IP65 protection, a -20°C to 60°C operating range, 6,000+ cycles and bottom-panel access support exposed pole and tower installations where cabinet space is limited.

Quick Summary: The IP65 Pole-Mounted 48V 50Ah is a 2.4kWh outdoor LiFePO4 battery for RRU, AAU and remote telecom sites. It integrates 16 cells, BMS and an aluminum enclosure, measures 298.3 × 170.2 × 311mm, weighs approximately 22.2kg, and supports RS485/RS232 communication for remote monitoring and outdoor project integration.

Key Features

  • ✓2.4kWh outdoor backup for RRU and AAU telecom sites
  • ✓IP65 aluminum die-cast enclosure for exposed installations
  • ✓Integrated 16-cell LiFePO4 pack and battery management system
  • ✓RS485 and RS232 communication for remote monitoring
  • ✓Alarm protection for voltage, current, temperature, overload and short circuit
  • ✓Modular architecture designed for engineered parallel expansion
  • ✓Operating range from -20°C to 60°C
  • ✓Bottom-panel access for outdoor wiring and maintenance

Technical Specifications

Model48V50AH
Battery TypeLiFePO4 (Lithium Iron Phosphate)
Nominal Voltage48V
Nominal Capacity50Ah
Energy2.4kWh
Cell Specification3.2V/50Ah
Battery Pack Configuration16 cells + BMS + Aluminum Die-cast Outer Box
Dimensions (WDH)298.3 × 170.2 × 311 ± 1 mm
WeightApprox. 22.2 kg
Output Power Range2.4kWh
Grid ConnectionOff-grid
System TypePole-mounted
Communication PortRS485, RS232
Protection RatingIP65
Cycle Life≥6000 cycles
Operating Temperature-20~60°C
Storage Temperature0~40°C
Operating Relative Humidity≤90% (40°C ± 2°C)
Operating Altitude0 ~ 3600m
Operating Atmospheric Pressure70kPa ~ 106kPa
Noise≤20dB

Common FAQs

Which telecom sites is this pole-mounted battery designed for?

The unit is intended for RRU, AAU, roadside and other distributed telecom sites requiring outdoor 48V backup without a full equipment shelter. Confirm mounting position, load, required backup duration, cable route, environmental exposure and maintenance access before selection.

How much backup time can the 2.4kWh battery provide?

Runtime depends on the site's actual DC load, usable depth of discharge, system efficiency, temperature, cable losses and aging reserve. Divide usable battery energy by the measured load for an initial estimate, then apply the operator's required engineering margin.

What is required for pole mounting?

The enclosure measures 298.3 × 170.2 × 311mm and weighs approximately 22.2kg. The pole, bracket, fasteners and mounting height must support the installed load and local wind conditions. Cable strain relief, grounding and safe service access also require review.

What does the IP65 rating cover?

The integrated enclosure is specified as IP65 for outdoor protection against dust and water exposure. Installation must still address cable-entry sealing, drainage, orientation, flooding risk, salt spray, corrosion, direct solar load and maintenance practices at the site.

Can multiple units be connected for more capacity?

The modular design supports engineered expansion, but parallel operation must be confirmed for the planned quantity. Review battery state of charge, communication, cables, protection, current sharing, mounting arrangement and site controller settings before connecting multiple outdoor units.

How does remote monitoring work?

RS485 and RS232 ports support integration with compatible dynamic monitoring or site-control systems. Confirm the protocol, connector, register map, telemetry and alarm requirements before ordering because the battery interface must match the network equipment used at the site.

What environmental limits should be checked?

The specified operating temperature is -20°C to 60°C, with relative humidity up to 90% at 40°C ± 2°C and altitude up to 3600m. Site design must also consider solar heat, ventilation, lightning protection, corrosion and local weather conditions.

Which certification documents and warranty are available?

Documentation for UN38.3, CE, RoHS and FCC review is available, with a 5-year warranty. Confirm destination-market and tender requirements before ordering, and provide the application, mounting environment, quantity, monitoring interface and shipping destination.

Telecom Project Resources

Use these resources to compare site configurations, estimate backup capacity, and prepare the technical details required for a 48V telecom battery quote.

Why Source From LINEX

Factory-Direct Wholesale OEM / ODM & private label support for importers and distributors.
5-Year Warranty Covered on every LiFePO4 battery we ship.
Certified Quality UN38.3 · CE · RoHS · MSDS on file for every model.
100% Tested Before Shipment Every unit capacity- and safety-tested before it ships.
✆WhatsApp ✉Email ↑Top